Harness and eddy-current transducers

This section presents sketches of harnesses and eddy-current transducers (ECT):

• displacement sensor DP-I ITsFR.402248.001;
• vibration displacement sensor DVP IKLZh.402248.003;
• axial shift sensor DOS IKLZh.402218.001;
• axial shift sensor DOS IKLZh.402218.003.

Table 6.1
Harness

Code	Design	Length, mm	Figure No.
L1	Metal hose	10000	6.1
L2		9000
L3		8000
L4		4750
L5	Partially metal hose	4750	6.2
L6		5000	6.3
L13		4000
L14		4500
L17		8000
L9	Metal hose, right-angle connector (For ECT)	10000	6.4
L10		9000
L11		8000
L12		4750
L15	Metal hose	5000	6.5
L16	Metal hose  with a tube	5000

Notes. Harness L6, L13, L14 are used only with ECTs having setup thread 3/8’’.

Harness ITsFR.685661.014 (Fig. 6.6) is a component part of displacement sensor DS-I ITsFR.402248.001 with normalizing transducer NT7 and NT8.

Designation	Identification mark	L, mm	Code
ITsFR.685621.027	КОS	10000	L1
-01	КОS-1	9000	L2
-02	КОS-2	8000	L3
-03	КVP	4750	L4

Designation L, mm L, mm Code ITsFR.685566.007 1500 5000 L6 -01 1000 4000 L13 -02 1530 4500 L14 -04 8000 35 L17

Designation Marking L, mm Code ITsFR.685621.053 KOS 1000 L9 -01 KOS-1 9000 L10 -02 KOS-2 8000 L11 -04 RVP 4750 L12

Designation	Fig.	Code
ITsFR.685661.015	1	L15
-01	2	L16

 
Eddy-current transducers

Code	Design	Mounting thread	Fig. No.
ECT1	Metal hose	М10х1	6.7
ECT2			6.8
ECT3	Bar	М12х1	6.9
ECT4			6.9
ECT5	Cable	М10х1	6.7
ECT6	Bar	М12х1	6.9
ECT10	Cable	3/8’’, pitch-24 theads per inch (3/8’’24UNF)	6.12
ECT11			6.12
ECT12			6.10
ECT13			6.12
ECT18	Cable – analogue BENTLY NEVADA 300H		6.16
ECT19	Cable – analogue BENTLY NEVADA 300LR		6.17
ECT20	Cable		6.26
ECT21			6.26
ECT14	Cable	М10х1	6.11
ECT15	Metal hose		6.13
ECT16	Cable		6.14
ECT30			6.11
ECT23			6.11
ECT24			6.11
ECT22	Bar		6.18
ECT25	Bar/Cable	3/8’’24UNF, 3/4’’16UNF	6.19
ECT26			6.19
ECT27	Cable	3/8'', pitch-24 threads per inch	6.20
ECT28			6.20
ECT29			6.12
ECT17			6.15
ECT31	Cable with insert	М10х1	6.22
ECT32			6.22
ECT33	Bar		6.23
ECT34	Cable with insert		6.24
ECT35			6.24
ECT36	Cable	3/8’’, pitch-24 threads per inch (3/8’’24UNF)	6.12
ECT37			6.12
ECT38	Cable with insert	М12х1	6.22
ECT39	Bar	М10х1	6.9
ECT40	Cable	М10х1	6.24
ECT41-57	Cable with sealed lead out	М10х1	6.27
ECT58	Bar	М12х1	6.9
	ECT59		6.9
ECT60	Cable	М10х1	6.11
ECT61	Bar		6.23
ECT62	Metal hose in a tube	М10х1	6.26
ECT63	Bar	М12х1	6.9
ECT7	Metal hose	М18х1	6.28
ECT8
ECT9

Designation	l, mm	L, mm	Code
IKLZh.408113.011	210	276	ECT3
-01	210	456	ECT4
-02	75	165	ECT6
-03	210	500	ECT9
-04	210	550	ECT58
-05	210	600	ECT59
-06	210	315	ECT63

Designation	L1, mm	L2, mm	L, mm	Code
IKLZh.408113.012	50	500	630	ECT5
-03	70	580	730	ECT14
-04	70	500	650	ECT30
-05	150	900	1130	ECT23
-06	50	700	830	ECT24
-07	50	420	550	ECT60

Designation	l,мм	L,мм	Код
ITsFR.408113.007	70	944	ECT10
-01	240	1054	ECT11
-02	165	1054	ECT13
-03	56	1090	ECT20
-04	70	1084	ECT21
-05	230	754	ECT36
-06	165	690	ECT37

Designation	l, mm	l, mm	Code
ITsFR.408113.015	460	929	ECT25
-01	475	580	ECT26

Designation	l, mm	Code
ITsFR.408113.017	56	ECT27
-01	27	ECT28

Designation	l, mm	L1, mm	L, mm	Code
ITsFR.408113.019	900	1450	1600	ECT31
-01	1350	1900	2060	ECT32
-0,2	1520	1900	2060	ECT38

Designation	l, mm	L1, mm	L, mm	Code
ИЦФР.408113.022	220	186	315	ECT33
-01	295	261	390	ECT61

Designation	l, mm	L, mm	Code
ITsFR.408113.023	900	1490	ECT34
-01	1350	1940	ECT35

Обозначение	L, мм	l, мм	l1, мм	Код
ITsFR.408113.028	1980	1500	120	ПВ41
-01	1980	1800	120	ПВ42
-02	2280	2100	120	ПВ43
-03	2580	2400	120	ПВ44
-04	2880	2700	120	ПВ45
-05	3180	3000	120	ПВ46
-06	1635	1500	75	ПВ47
-07	1935	1800	75	ПВ48
-08	2235	2100	75	ПВ49
-09	2535	2400	75	ПВ50
-10	2835	2700	75	ПВ51
-11	3135	3000	75	ПВ52
-12	935	800	75	ПВ53
-13	2110	1800	250	ПВ54
-14	3110	2800	250	ПВ55
-15	1580	1400	120	ПВ56
-16	1180	1000	120	ПВ57

Designation	l, mm	Code
ITsFR.408113.013	635	ECT7
-01	1635	ECT8
-0,2	2635	ECT9