Conversion of input signals as DC voltages within the following ranges: 0–300 V, 0–150 V, 0–40 V, 0–10 V, 0–5 V into a unified output signal of 4–20 mA.

Description

The converter is mounted in a housing of PHOENIX CONTACT. The housing's design is provided for its mounting on a standard bus (rail) of DIN 35/7,5 type.
There are printed circuit boards with hook-up elelments in the converter's housing. There are also mounted terminal blocks for connection of an output signal source and load resistance. On the housing's side surface there is a hole providing for access to control a resistor while calibrating the converter.
The particular features are high precision of conversion within a wide temperature range, galvanic isolation of input, output and power supply circuits, possibility to update the conversion characteristics.
Depending on an input signal's range the converter is connected according to Fig. 2.1–2.5 using the wire with 0,14–2,5 mm2 section.

Technical characteristics

Reduced error of conversion, %:
basic	< 0,25
auxilliary (at ambient temperature -40 ... +70°C)	< 0,1/10°C
Protection class according to GOST 14254-96	IP20
Load resistance, Ohm	< 500
Power supply voltage, V	19–30
Current consumption, mА	< 70
Insulation strength, V:
input-power supply	2000
input-output	2000
output-power supply	500
Mean time to failure, h	105
Warranty period, years	1,5
Service time, years	12,5
Overall dimentions, mm	42х115х80
Weight, kg	0,225±0,025

Operation conditions

Operating temperature range, °С	-40 ... +70
Sinusoidal vibration according to GOST 12997-84	F3

Operation details: State Register No. 27342-04. Approval Type Certificate RU.C.34.011.A
No.18294, 01.08.09.

Scope of delivery: PIMB-332 ITsFR.426442.003, ITsFR.426442.003РRE.

Ordering information: ITsFR.426442.003 Measuring transducer.